Rane MC 22 Bedienungsanleitung PDF herunterladen

Manual-1

OPERATORS MANUAL

QUICK START

Shredded, this document makes excellent packing material. In its present form, it makes interesting and useful reading.

If you run out of patience quickly, at least read this part to make sure you don’t exterminate everything within a two mile

radius by doing something wrong.

Attach one or two channels of inputs and outputs to the respective connectors on the rear. This device uses low imped-

ance balanced line drivers. Do not connect the XLR “+” or “–” output pins to ground, as this may cause the power supply

to shut down. For unbalanced use, leave the unused output pin (“+” or “–”) unterminated.

With the RATIO turned all the way down at 1:1, THRESHOLD turned all the way up to 20 dBu, and the LEVEL

controls in their center at 0 dB, you have an expensive patch cord.

While sending a signal to the MC 22, adjust the INPUT LEVEL so the +4 dBu LED lights occasionally, but the OL

LED does not light. Now increase the RATIO to something useful, like 2:1 (with the control set at 2, the Ratio is 2:1; at 5,

it is 5:1.) Adjust the THRESHOLD to the point you want the Compressor to kick in. The GAIN REDUCTION meter

reads the amount of signal compression.

Both Compressors will activate by the source material applied to either Channel if the LINK switch is ON. This is the

preferred setting for stereo program material.

WEAR PARTS: This product contains no wear parts.

MC 22

STEREO COMPRESSOR

1 2 3 4 5 6 ... 10 11

Inhaltsverzeichnis

Seite 1 - OPERATORS MANUAL

Manual-1OPERATORS MANUALQUICK STARTShredded, this document makes excellent packing material. In its present form, it makes interesting and useful rea

Seite 2

Manual-10All features & specifications subject to change without notice. 102938©Rane Corporation 10802 47th Ave. W., Mukilteo WA 98275-5098 TEL

Seite 3

RISK OF ELECTRIC SHOCKDO NOT OPENCAUTIONTo reduce the risk of electrical shock, do not open the unit. No user serviceable parts inside. Refer servicin

Seite 4 - OPERATING INSTRUCTIONS

Manual-2INPUT LEVEL controlThis controls the overall level. Unity gain isreached at “0”. With signal applied, set thiscontrol so the +4 dBu LED light

Seite 5 - MC 22 APPLICATIONS

Manual-3Cable WiringIn agreement with IEC and AES/ANSIstandards, XLR wiring convention is pin 2Positive (hot), pin 3 Negative (cold), andpin 1 chassis

Seite 6 - Manual-6

Manual-4OPERATING INSTRUCTIONSA PRIMERLet’s start with what a compressor actually does. Nomatter how you cut it, this is an automatic volume control.

Seite 7 - Manual-7

Manual-5adx NOISE REDUCTIONThe adx circuit is an automatic downward expander,acting like a compressor running in reverse, making the quietparts quiete

Seite 8 - SOUND SYSTEM INTERCONNECTION

Manual-6DRIVER PROTECTION FINE TUNING1. Determine the driver’s maximum continuous average power rating in watts (W) (specified by the manufacturer).2.

Seite 9 - Manual-9

Manual-7Figure 1. Sound system with compression exampleFigure 2. Sound system with Driver protection.

Seite 10 - MOJO GLOSSARY

Manual-8SOUND SYSTEM INTERCONNECTIONproperly, connecting both ends of the shield is not oftenpracticed, since doing so can create noisy interconnectio

Seite 11 - IMPORTANT SAFETY INSTRUCTIONS

Manual-9VARIOUS XLR & ¼" CABLE ASSEMBLIES

Kommentare zu diesen Handbüchern

Keine Kommentare

Rane MC 22 Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Audio Rane MC 22 herunter. Rane MC 22 User Manual Benutzerhandbuch

Inhaltsverzeichnis

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Audio Rane MC 22