Rane CP 62 Bedienungsanleitung PDF herunterladen

Manual-1

OPERATORS MANUAL CP 62

COMMERCIAL PROCESSOR

QUICK START

This unit packs a lot of features, so let’s start by just getting some music running through it. Make all connections

with the power amplifiers off. The CP 62 must be earth grounded for safety and correct operation. Connect a wire to the

grounding screw (near the POWER input jack) to a known earth ground. The CP 62 can drive two zones with separate

program and levels. Zone 1 can be a stereo zone (determined by the MONO/STEREO MODE switch on the rear), we’ll

hook that up next. The zone outputs are fully balanced, so we recommend the use of balanced cables (¼" Tip-Ring-

Sleeve) to connect to the amplifier. If the amplifier’s inputs are unbalanced, the CP 62 still works fine using ¼" (Tip-

Sleeve) connectors if cable lengths are kept short (under 10 feet). Connect the CP 62 ZONE 1 LEFT and RIGHT

OUTPUTS to the amplifier inputs. Hook up a CD or tuner to PROGRAM INPUT 1 using a standard stereo RCA cable.

Plug the RS 2 power supply into the red power connector on the back of the CP 62 and its line cord into the AC line—the

PWR LED should come on. Turn both ZONE LEVEL controls fully counter clockwise. Turn the PROGRAM INPUT

LEVEL LINE 1 up to 12 o’clock. Now it’s OK to turn on the amplifer. Slowly turn up ZONE 1 LEVEL. With the CD/

tuner playing, you should hear program coming from the speakers.

Now connect your other sources to the other PROGRAM INPUTS. Select each input with the ZONE 1 PROGRAM

SELECT switch. Adjust individual source levels with the PROGRAM INPUT LEVELS. Adjust zone volume with the

ZONE LEVEL control. Tailor the zone 1 equalizer to your liking. Connect a second amplifer to the ZONE 2 OUTPUT

and run separate programs and levels to another room.

Never connect anything except an Rane RS 2 power supply to the thing that looks like a red telephone jack on

the rear of the CP 62. This is an AC input and requires special attention if you do not have an operational power supply

exactly like the one originally packed with your unit.

Never connect anything except the optional Rane R1 zone assign or R2 source and level remote controls (or

their equivalent) to the things that look like black telephone handset jacks on the rear of the CP 62. These are not

telephone connections.

1 2 3 4 5 6 7 8

Inhaltsverzeichnis

Seite 1 - OPERATORS MANUAL CP 62

Manual-1OPERATORS MANUAL CP 62COMMERCIAL PROCESSORQUICK STARTThis unit packs a lot of features, so let’s start by just getting some music running thr

Seite 2 - FRONT PANEL DESCRIPTION

Manual-2FRONT PANEL DESCRIPTION1. MICROPHONE LEVEL control: Adjusts the level for the paging microphone. The initial level is set by the MIC TRIM onth

Seite 3 - REAR PANEL DESCRIPTION

Manual-3REAR PANEL DESCRIPTION1. PHONE/LINE PAGING INPUT jack: This ¼" unbalanced TS (Tip-Sleeve) jack connects to a telephone system pagingoutpu

Seite 4 - CP 62 CONNECTION

Manual-4CP 62 CONNECTIONThis section covers the most basic of systems. Thisproduct is very versatile, so variations on system hookup areencouraged to

Seite 5

Manual-5Two Paging Sourceswith No CP R1 Remote ControlWhen using both paging inputs but not the CP R1 remoteyou do need to plug in and set the configu

Seite 6 - Manual-6

Manual-6CP R2 Source & Level RemoteControlTable 1 shows the flexibility of configuring the R2. TheR2 controls operate the same as the PROGRAM SELE

Seite 7 - Manual-7

Manual-7Preparing the cablesAll modular connectors are not created equal. The typicalmodular plug that connects to your telephone is a 6-position/4-co

Seite 8 - IMPORTANT NOTE

Manual-8All features & specifications subject to change without notice. SEP96Printed in the U.S.A. on Recycled Paper©Rane Corporation 10802 47th

Kommentare zu diesen Handbüchern

Keine Kommentare

Rane CP 62 Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Audio Rane CP 62 herunter. Rane CP 62 User Manual Benutzerhandbuch

Inhaltsverzeichnis

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Audio Rane CP 62