Rane MM 8x Bedienungsanleitung PDF herunterladen

Manual-1

OPERATORS MANUAL

MM 8x MIXER

QUICK START

Here are a few basic “plug and play” steps to get you performing. If you are a first time DJ mixer user, please do

yourself a favor and at least read this section.

Begin by making sure your amplifier is off before making connections. The MM 8x has all unbalanced connectors,

except for the 1/4” balanced main outputs and XLR microphone inputs. Plug a source component, such as a CD player,

into one of the four LINE inputs on the rear. Connect the MAIN OUTPUTS to your amplifier. Set all front panel controls

to the middle of their travel and all pushbuttons to their out position. Slide the MASTER LEVEL down to 0. Set an

INPUT SELECT switch to your active source input. Plug in the MM 8x’s power supply and see the PWR indicator

illuminate. Turn on your source and amplifier. Slowly turn up the MASTER LEVEL and see the meters lighting and hear

music from your speakers.

In use, you can get tripped up at two places. If you have a phono signal into one of the four PH/LN inputs, be sure the

PH/LN switch is in the PHONO position (in); likewise, when using a tape deck or CD into these inputs, be sure the switch

is in the LINE (out) position. If you plug into the PROGRAM LOOP, the internal signal path is broken. Be sure that a

complete loop is made, to and from an outside device.

Couldn’t be easier, right?

Never connect anything except a Rane power supply to the thing that looks like a telephone jack on the rear or the

unit. This is an AC input and requires special attention if you do not have a power supply exactly like the one originally

packed with your unit. See the full explanation of the power supply requirements elsewhere in this manual.

1 2 3 4 5 6 7 8 9

Inhaltsverzeichnis

Seite 1 - MM 8x MIXER

Manual-1OPERATORS MANUALMM 8x MIXERQUICK STARTHere are a few basic “plug and play” steps to get you performing. If you are a first time DJ mixer user

Seite 2 - FRONT PANEL DESCRIPTION

Manual-2FRONT PANEL DESCRIPTION1. MAIN MIC ON switch: This switch puts the Main Mic signal into the mixer signal path. When the switch is pressed in,

Seite 3 - Fader Care:

Manual-312. Meter and Mode switch: This peak-dBu reading meter displays one of two modes, depending on the switch position. Inthe out position, the me

Seite 4 - TOP / REAR PANEL DESCRIPTION

Manual-4TOP / REAR PANEL DESCRIPTION1. Remote POWER Supply Input: The unit is supplied from the factory with a Rane Model RS 1 remote power supplysuit

Seite 5 - Manual-5

Manual-5MM 8x CONNECTIONWith the MM 8x’s ability to accommodate a wide varietyof systems, these basic guidelines will assist the user inincorporating

Seite 6 - Manual-6

Manual-6ACTIVE CROSSFADEChannels 1 and 2, and channels 3 and 4 are internallycombined after the channel faders into A and B mixesrespectively. The out

Seite 7 - MOJO GLOSSARY

Manual-7MOJO GLOSSARYbalanced line The recommended method of interconnecting audioequipment. A balanced line requires three conductors: a twisted-pair

Seite 8 - INTERCONNECTION

Manual-8SOUND SYSTEMINTERCONNECTIONRane’s policy is to accommodate rather than dictate.However, this document contains suggestions for externalwiring

Seite 9 - Manual-9

Manual-9VARIOUS XLR, RCA & ¼" CABLE ASSEMBLIES