Rane PE 17 (1993 version) Bedienungsanleitung PDF herunterladen

Manual-1

PE 17

PARAMETRIC EQUALIZER

OPERATORS MANUAL

QUICK START

Those who choose not to read this modest informational snippet (intended to ward off one of life’s embarrassing

moments) are those who wish to hasten the point at which their entire sound system locks up, screams unmercifully,

shatters windows, causes dogs to howl, babies to cry, and melts all the compression drives, dripping molten titanium all

over the hand-polished walnut decor. Pity.

There are only a few things to check when using a PE 17. Always set both GAIN controls as close to the top of the

panel as possible without causing the OL LED to light constantly. Use the CUT FILTERS to tailor the bandwidth for each

application. Always double check that each FREQx multiplier switch (located beneath each FREQ control) is set to the

correct position. Great surprises result from false settings.

For extra-deep notching applications, use Bands 3 and 4 and set them exactly the same. Notches as deep as 30 dB are

possible, since Bands 3 and 4 are in series while most other bands are in parallel (see the Block Diagram in the Specifica-

tions Section).

Hook-up is simple. The PE 17 accepts all combinations of balanced or unbalanced, XLR or ¼" connectors. However,

the INPUT connectors are wired in parallel and may not be used together. Use only one at a time. They will not function as

a summing type of input for two different sources, but they may be used in a daisy chain fashion to feed other units. On the

other hand (to randomly pick a hackneyed expression), you may use the paralleled Outputs to drive two destinations.

Never connect anything except a Rane approved AC power supply to the thing that looks like a red telephone jack on

the rear of the PE 17.

WEAR PARTS: This product contains no wear parts.

1 2 3 4

Inhaltsverzeichnis

Seite 1 - OPERATORS MANUAL

Manual-1PE 17PARAMETRIC EQUALIZEROPERATORS MANUALQUICK STARTThose who choose not to read this modest informational snippet (intended to ward off one

Seite 2 - FRONT PANEL DESCRIPTION

Manual-2FRONT PANEL DESCRIPTION OVERLOAD indicator: This red LED illuminates whenever the signal level at any of five critical nodes comes within 3-4

Seite 3 - REAR PANEL DESCRIPTION

Manual-3REAR PANEL DESCRIPTIONCHASSIS GROUNDINGAfter hooking up your system, if it exhibits excessive hum or buzzing, an incompatibility in the ground

Seite 4 - PE 17 CONNECTION

Manual-4OPERATING INSTRUCTIONSNow it is knob twisting time! Power up the system in thenormal fashion, always turning on the power amplifiers last.It i

Kommentare zu diesen Handbüchern

Keine Kommentare

Rane PE 17 (1993 version) Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Audio Rane PE 17 (1993 version) herunter. Rane PE 17 (1993 version) User Manual Benutzerhandbuch

Inhaltsverzeichnis

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Audio Rane PE 17 (1993 version)