Rane SP 13 Bedienungsanleitung PDF herunterladen

Manual-1

OPERATORS MANUAL SP 13

STICK PREAMP

QUICK START

The SP 13 accommodates the signals from two pickups from a Stick® instrument, where the pickups are wired to the

tip and ring of a standard stereo ¼" TRS (Tip, Ring, Sleeve) plug. You do not need internal preamps when using the SP 13.

1. Slide the Input Wiring switch to the correct position agreeing with your pickup wiring situation.

2. Turn the MAIN OUT LEVEL controls down.

3. Connect the SP 13 to your amplifier using the ¼" MAIN OUTPUTS or use the HEADPHONE jack.

4. Initially, turn the A and B INSTRUMENT GAIN TRIM controls half way up.

6. Move each LOW CUT slider to the top (15 Hz); center all EQ sliders; center the PAN sliders; leave the INVERT

pushbuttons out; and position the LEVEL sliders to “4”

7. Plug in the instrument to the INPUT jack on the front of the SP 13 with a stereo ¼" TRS cable.

8. Power up the SP 13, then turn on your amplifier.

9. Play your instrument and slowly turn up the MAIN OUT LEVEL controls. You should hear sound from your speakers.

If not, recheck all settings and wiring, and read the next few pages.

Never connnect anything except an approved Rane power supply to the red thing that looks like a telephone jack on the

rear of the unit. This is an AC input and requires special attention if you do not have a power supply exactly like the one

originally packed with your unit. See the full explanation of the power supply requirements elsewhere in this manual.

WEAR PARTS: This product contains no wear parts.

1 2 3 4

Inhaltsverzeichnis

Seite 1 - OPERATORS MANUAL SP 13

Manual-1OPERATORS MANUAL SP 13STICK PREAMPQUICK STARTThe SP 13 accommodates the signals from two pickups from a Stick® instrument, where the pickups

Seite 2 - FRONT PANEL DESCRIPTION

Manual-2FRONT PANEL DESCRIPTION Stick® INSTRUMENT INPUT: is a stereo ¼" TRS (Tip-Ring-Sleeve) INPUT jack for use with a Stick instrument withtwo

Seite 3 - REAR PANEL DESCRIPTION

Manual-3REAR PANEL DESCRIPTION MAIN OUTPUTS—MIC-level: Two XLR connectors used as a direct feed to mixing console mic inputs. Pin 2 is “+”positive, p

Seite 4 - OPERATING INSTRUCTIONS

Manual-4OPERATING INSTRUCTIONSOPTIMIZING PICKUP GAIN CONTROLSThe Gain of each pickup input is adjusted via recessedINSTRUMENT GAIN trims on the front

Kommentare zu diesen Handbüchern

Keine Kommentare

Rane SP 13 Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Audio Rane SP 13 herunter. Rane SP 13 User Manual Benutzerhandbuch

Inhaltsverzeichnis

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Audio Rane SP 13