Rane Serato Scratch live Spezifikationen PDF herunterladen

Before installing, visit the Oﬃcial Scratch LIVE Forum at

scratchlive.net to be sure you have the latest software. Check this

regularly for software updates and performance tips.

Installation

1) Install the Software

Mac

1. Insert the Software Installation CD and double-click the installer icon.

Windows XP

1. Insert the Software Installation CD. If Setup doesn’t start automati-

cally, browse to the CD drive and run setup.exe.

2. Follow the on-screen instructions. Once the installation is complete,

Scratch Live appears in the Start Menu under All Programs > Serato

> Scratch Live. Note: Select Custom Install to change the directory

you wish to install Scratch LIVE into.

2) Connect the Hardware

Mac

Mac users need only connect the SL 1 interface after installing the soft-

ware. No extra hardware installation is required.

Windows XP

1. Connect the SL 1 interface to your computer with the USB cable.

2. e

Windows New Hardware Wizard appears.

3. Insert the Software Installation CD, then press

Next.

4. Windows may complain that the software driver is not digitally signed.

Choose Continue Anyway.

5. Click Finish once installation is complete.

Note: You may be prompted the location of “SeratoUsb.sys”. Browse to ﬁnd this

ﬁle on the Scratch LIVE install CD or web download, under “Drivers\SL 1”.

Connections

Turntable connection

1. Connect your turntables to INPUTS 1 and 2 of the SL 1 interface.

When connected properly, circles will be displayed within the scope view of

the setup screen while playing the control records (see Calibrating Scratch

LIVE in the manual for more info).

2. Connect the turntable ground wires to the ground post of your mixer.

3. Connect the LINE OUTPUTS of the SL 1 to the line inputs (sometimes

called CD or AUX) on your DJ mixer, check that those inputs are

switched to line level.

If audio from Scratch LIVE sounds excessively loud or distorted, the LINE

OUTPUTS have been connected to phono level inputs by mistake.

4. Connect the USB cable from the SL 1 to your Mac or PC.

Windows XP drivers need to be installed when connecting the SL 1 to a

USB port on a PC. On some Windows machines, each USB port is treated

separately, requiring a separate driver install for each USB port.

CD player connection

1. Connect your CD players to INPUTS 1 and 2 of the SL 1 interface.

When connected properly, circles will be displayed within the scope view of

the setup screen while playing the control CDs (see Calibrating Scratch

LIVE in the manual for more info).

2. Connect the LINE OUTPUTS of the SL 1 to the line inputs on your DJ

mixer, check that those inputs are switched to line level.

If audio from Scratch LIVE sounds excessively loud or distorted, the LINE

OUTPUTS have been connected to phono level inputs by mistake.

3. Connect the USB cable from the SL 1 to your Mac or PC.

Windows XP drivers need to be installed when connecting the SL 1 to a

USB port on a PC. On some Windows machines, each USB port is treated

separately, requiring a separate driver install for each USB port.

QUICK START

Calibrating the Software

When setting up Scratch LIVE in a new location, calibrate the software to

the background noise picked up by the needles, cables and CD players.

1. When using turntables, place the needles on the records with the

motors oﬀ and switch to the setup screen. When using CD players,

pause the CD and switch to the setup screen.

2. Press and hold the estimate button for each side, letting go when

the threshold setting is stable (usually about one second). In situations

with lots of background noise, the threshold will need to be higher.

3. Start the motors, and adjust the L/R Balance and P/A Balance next

to each calibration scope to adjust the shape of the inner ring. Use

the scope zoom slider (1x to 16x) to zoom in or out as necessary. If

you have trouble getting the rings circular, try cleaning or changing your

needles. If the image appears as a line, then one channel of the turntable is

not working. See examples of problems and ﬁxes on pages Manual-24-25.

4. Check the percentage (%) in the bottom right corner of each calibra-

tion scope, indicating the percentage of readable signal — this number

should be close to 100% when your system is calibrated properly.

Optional connections

• To play normal records, connect the THRU OUTPUTS of the SL 1 to

the mixer’s phono inputs, then select Phono on your mixer for normal

vinyl playback. is plays “thru” without disconnecting any wires.

• To play normal CDs, connect the THRU OUTPUTS to a set of line

inputs on the mixer when using CD players (when using Scratch LIVE

with CD players you will need a mixer with a total of four line inputs).

is plays normal CDs “thru” without disconnecting any wires.

Note: power is required, either from the USB port or an external 9 VDC

power supply when using the THRU outputs.*

• Connect a dynamic microphone to the MIC INPUT of the SL 1 to be

able to scratch your own mic recordings. See page Manual-17.

• Connect a ¼" to ¼" cable from the MIC THRU jack on the SL 1 to the

microphone input on your DJ mixer to allow normal use of the mic,

independent of Scratch LIVE. (Note: power is required, either from the

USB port or an external 9 VDC power supply. See the manual.)

•* Connect an external power supply to the SL 1 to power the THRU

channels when USB power is not present. is allows you to play

vinyl (or CDs) when the laptop is not present, useful for permanent

installations or when using more than one laptop. e power supply

is 9 VDC, 300 mA (or more) using a P6 type barrel plug. Radio Shack

carries a compatible supply. Use model 273-1770 with Adaptaplug N.

MIC IN

TO MIC

PHONO LINE PHONO LINE

FROM TURNTABLE OR CD PLAYER OUTFROM TURNTABLE OR CD PLAYER OUT

FROM TURNTABLE GROUNDFROM TURNTABLE GROUND

GROUND

USB TO COMPUTER

1 2

Inhaltsverzeichnis

Seite 1 - QUICK START

Before installing, visit the Oﬃcial Scratch LIVE Forum at scratchlive.net to be sure you have the latest software. Check this regularly for software u

Seite 2 - Version 1.6.2

All features & speciﬁcations subject to change without notice. build 16227 / part 16578©Rane Corporation 10802 47th Ave. W., Mukilteo W

Weitere Dokumente für Audiomischer Rane Serato Scratch live

Um das Dokument anzuzeigen Rane Serato Scratch live Bedienungsanleitung

Rane Serato Scratch live Bedienungsanleitung (12 Seiten)

Rane Serato Scratch live Bedienungsanleitung (3 Seiten)

Um das Dokument anzuzeigen Rane Serato Scratch live Betreibershandbuch

Rane Serato Scratch live Betreibershandbuch (24 Seiten)

Kommentare zu diesen Handbüchern

Keine Kommentare

Rane Serato Scratch live Spezifikationen

Stöbern Sie online oder laden Sie Spezifikationen nach Audiomischer Rane Serato Scratch live herunter. Rane Serato Scratch live Specifications Benutzerhandbuch

Inhaltsverzeichnis

Weitere Dokumente für Audiomischer Rane Serato Scratch live

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Audiomischer Rane Serato Scratch live