Rane SL 3 Bedienungsanleitung PDF herunterladen

RANE SL3 FOR SERATO SCRATCH LIVE • QUICK START

Step 1: SL3

Connections

This Quick Start guide will get you the

basics. But please read the manual!

1. Connect your CD players or turntables

to the LEFT and RIGHT DECK INPUTS

on the SL3.

2. Set each DECK INPUT to the correct

input level using the dip switches. Set

the switches UP for Phono (turntables)

or DOWN for Line (CD players).

The AUX input is usually DOWN for

recording at Line level.

Playing Regular Vinyl and CDs

NOTE: the SL3 must be powered by

USB or the supplied external power

supply for the DECK THRUs to work.

While Scratch Live is not running, and

the SL3 is powered by the external supply,

the deck thrus on the SL3 will always be

on, allowing you to play regular CDs and

vinyl with your CD players or turntables.

When the SL3 is powered by the

universal power supply, and then Scratch

Live is launched, the deck thrus are still

on. This allows a laptop to be connected

during a set (when using the deck thrus)

with no audio interruption.

If the SL3 is not powered by the

universal power supply when Scratch Live

is launched (USB connected), the deck

thrus will be off, but can be turned on in

Scratch Live.

To turn the thrus off and on in

Scratch Live, click on the THRU

button next to each Virtual Deck in

Scratch Live. This will change the state of

the channels to thru mode, sending audio

direct from the SL3 inputs to your mixer.

3. If you use turntables, connect their

ground wires to the ground posts on the

SL3. These ground wires are extremely

important for Scratch Live to track.

4. (Optional) To record your mix or from

your turntables into Scratch Live,

connect an additional output (such as

an AUX OUT) from your mixer to the

AUX INPUTS on the SL3.

5. Connect the DECK OUTPUTS of the

SL3 to Line inputs on your mixer.

Note: If Scratch Live audio is

excessively loud or distorted, the SL3

OUTPUTS have been connected to

phono level inputs by mistake.

6. (Optional) Connect the SL3 AUX

OUTPUT to an additional Line input or

Aux input on your mixer to output the

sample player to its own mixer input.

7. Using the USB cable, connect your SL3

to a USB 2.0 port on your computer.

Connect it directly to your computer

and not through a hub or splitter.

+12-12

100

+6OFF

100

2 8

100

2 8

–4

–2

–8

–16

–24

PERFORMANCE MIXER

100

2 8

+6OFF

OUT

+6OFF

100

MIC LOW

MIC HIGH

AUX IN

OUTPUT

LEVELS

MAIN

SOURCE

PGM 1 PGM 2

AUX OUT

PANHIGH

PHONES

MID

GAIN GAIN

LOW

SOURCE

HIGH

MID

LOW

TTM 56S

A B

PGM 1

CUE

PGM 2DRY

FlexFX

WET

MASTER

CUE

SLOW

FADER 1 CONTOUR

FAST SLOW

FADER 2 CONTOUR

FASTSLOW

CROSSFADE CONTOUR

FAST

MIC LEVEL

CHANNEL

SWAP

REVERSE

REVERSEREVERSE

PAN

KILL KILL

STEREO HOUSE

MONO PGM1 / PGM2

PGM 1 PGM 2

PGM 1

PGM 2

AUX

OUT

FROM TURNTABLE

OR CD PLAYER OUT TO

SL3 RIGHT DECK INPUTS

POWER SUPPLY IS REQUIRED

FOR DECK THRUS TO WORK

WHEN NOT POWERED BY USB

FROM TURNTABLE

OR CD PLAYER OUT TO

SL3 LEFT DECK INPUTS

TURNTABLE

GROUNDS

SL3 SWITCHES:

PHONO UP

LINE DOWN

SL3

AUX IN

TO MIXER

AUX OUT

SL3

AUX OUT

TO MIXER

AUX IN

SL3

DECK OUTS

TO MIXER

PGM INPUTS

(LINE)

USB TO COMPUTER

LOCK

PUSH

OPEN

SL3 QUICK START

1 2 3 4

Inhaltsverzeichnis

Seite 1 - SL3 QUICK START

RANE SL3 FOR SERATO SCRATCH LIVE • QUICK START1Step 1: SL3 ConnectionsThis Quick Start guide will get you the basics. But please read the manual!1. Co

Seite 2 - Scratch live

RANE SL3 FOR SERATO SCRATCH LIVE • QUICK START2Step 2:InstallScratch liveMac1. Insert the Software Installation CD-ROM and double-click the Scratch Li

Seite 3 - Calibration

RANE SL3 FOR SERATO SCRATCH LIVE • QUICK START3Calibrating Scratch LiveWhen setting up Scratch Live in a new location, calibrate the software to the b

Seite 4 - Z X C V B N

Keyboard Shortcuts Actions Accessed Directly from the Computer KeyboardKEY ACTIONctrl - LLocate the current track. This will highlight the track you