Rane RE 27 Bedienungsanleitung PDF herunterladen (Seite 15)

MISCELLANEOUS

Chassis and Front Panel: Cold rolled steel.

Size: 19"W x 3.5"H x 8.5" rack depth.

Weight: RE 27: 11 Ib net RE 14: 11l Ib net

Frequency Response: 20Hz to 16kHz.

Maximum SPL: 140dB.

Display Range: +1 dB or ±3dB “green” window, selectable.

Measurement Level Range: 70dB to 120dB SPL, calibrated.

Curve Selection: Normal: flat from 40-16kHz, ±.5dB.

House: +3dB boost between 400 Hz & 1.6kHz.

Display Attack Time: Peak Instantaneous.

Frequency Accuracy: ±5% maximum.

Analyzer Filters: ANSI Class II

Pink Noise: Pseudo-random NMOS digitally-synthesized, 23-bit word length, 1 min. repetition rate.

Output level adjustable to +4dBm. Response: 16Hz to 20kHz, +1 dB; crest factor 4.0.

Microphone: Omnidirectional back-electret condenser type, powered by front panel jack (not

phantom power).

Sensitivity: -65dB.

Subsonic Filter: fixed at 20Hz, 18dB/octave.

Ultrasonic Filter: fixed at 50kHz, 12dB/octave.

Overload Indicator: Red LED, lights at 4dB below clipping.

Signal Present Indicator:

Green LED, lights above -20dBm input.

RE 14 Channel Separation: better than 75dB, 20-20kHz.

RFI Input Filters.

Bypass Switch: Passive (hard-wire type), red LED indicated (bypass=on).

Output Relay: Turn on/off transient control.

ANALYZER SECTION

1 2 ... 10 11 12 13 14 15

Keine Kommentare

Rane RE 27 Bedienungsanleitung Seite 15