Rane TTM 57SL Betreibershandbuch PDF herunterladen (Seite 24)

Repeat



entire length of the control record.

Tip: Short “loop” samples can be turned into a

continuous track using the repeat function. e loops

must be less than 10 seconds long, and cut at the start

and end of a bar.

Autoplay



auto

button to



setting turned on, when one



track starts automatically. Load

from a crate to play through

the songs in that crate, or from

your library to play through





and previous |



buttons to



the previous track in the list.

rela-

tive

and internal modes. Play

from start

must be checked in

the setup screen for autoplay to



Track gain



balance the volume of the tracks



made to the gain of a track is

saved with the ﬁle, and will be

reapplied to the entire track

when it is loaded again.

e level meter shows

the level sent to the hardware

-

ual track gain and master gain

adjustment.

Note: for automatic gain

setting of your tracks, see Use

auto gain on page 29.

Master gain

e master output of Scratch LIVE can be controlled

using the master gain control. is adjusts the output

volume of all tracks played. Note: for best results, set

the master gain to the 12 o’clock position, and adjust

the volume of individual tracks using the track gain

adjustment.

33 / 45 Speeds

Set this to match the speed of your

turntable for normal playback.

Tracking indicator

e tracking indicators on the

main screen show the quality of

the signal coming from the con-



of the bar indicates the speed



indicates the amount of position

information Scratch LIVE is



the record at normal speed, the

tracking indicator should be

grey. If it is mostly red there is a

problem reading the control sig-

nal. Make sure your needles are

clean, and check the calibration

in the setup screen. Note: it is

normal for the light to be red

when cueing or scratching.

Tap Tempo



usually is, in the song info area. ere is also an auto BPM

Pressing alt-space baralt-space bar a second time to activate





each bar etc. e range is set by the ﬁrst two taps, after that you can switch to any steady rhythm

you feel comfortable with – quarter notes, half note, whole notes. EscEnter saves









Key Lock



or pitch of the song stays locked

at what it would be if the track

was playing at normal speed,

regardless of the platter speed







when scratching for a natural





button to the top right of the



Tip: F5 and F10 will turn

Key Lock on and oﬀ for the left

and right decks respectively.

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 49 50

Kommentare zu diesen Handbüchern

Keine Kommentare

Rane TTM 57SL Betreibershandbuch Seite 24

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Audiomischer Rane TTM 57SL