32
Additional setup
is section covers general preferences and adjustments you can
make to improve the performance of Scratch LIVE. From the
main screen, tick setup to get to this area.
Hardware
is area contains settings dedicated to the TTM 57SL.
Firmware
If a firmware update is available after installing a new Scratch
LIVE software release, an update firmware button appears in
any reason the firmware upgrade does not work, just turn the
whilst performing a firmware upgrade.
Note: Newer firmware may not work with older versions of
Scratch LIVE! e mixer will still be usable with older Scratch LIVE
versions, but the effects do not display parameter values onscreen so
you will not be able to see how the effects are configured. You will
have same control over the effects that you have when using effects
without Scratch LIVE connected.
update firmware
If you have upgraded your firmware and you need to down-
LIVE
downgrade to the version that shipped with that Scratch LIVE
usb buer size (latency)
Scratch LIVE
chunks are used, the movement of the record is translated into
audio more often which results in a lower overall system latency.
computer to produce uninterrupted audio. If you want tighter
control, you should try decreasing
this setting, on the other hand, if you
mixer settings
save to mixer
-
tral
save to mixer button.
Each of the save to mixer buttons in the effects sections save
Scratch LIVE running and attached.
phono sensitivity
-
table inputs the same level as your line inputs.
transform direction
e joysticks also double as transform switches. To change the
joystick from software control to transform, press the joystick
-
tions you can move the joystick. e audio will cut out when the
joystick is moved in a direction that is checked.
latch kill switches
-
you press the button again.
meters
on, dual mono cue = off. For
more information see page 5.
phones
on, and the cue slider posi-
tion goes to phones when off
Kommentare zu diesen Handbüchern