Rane MM 12 Bedienungshandbuch PDF herunterladen (Seite 25)

OWNER’S MANUAL

SIXTY-FOUR

DJ Swapping

One of the biggest challenges of digital DJing has been seamlessly changing over from one DJ to the next

and playing back-to-back DJ sets. Now, with the next-level architecture of the Sixty-Four mixer, swapping

between digital DJs has never been easier.

If you’ve swapped between DJs using the Sixty-Two mixer, swapping with the Sixty-Four is done exactly

the same way. It's like a four-channel Sixty-Two. Another innovative feature of both mixers is MIDI routing.

When you assign a channel Input Source switch to your computer, MIDI follows along with the audio

automatically. This means two DJs can share the mixer, MIDI controls and all, without interference or

needing to manually toggle MIDI controls.

Deck Swapping Controls

At the top of each input channel is the Source Selector to switch input sources. If your computer is

connected to USB port A, switch a channel Source Select knob to USB A, and the mixer assigns the

corresponding Virtual Deck to that channel for audio playback. For example, assigning all four channels to

USB A1-A4, assigns all four virtual decks to the computer connected to USB port A.

The same applies to USB port B. If your computer is connected to USB port B, switching a channel

Source Select knob to USB B, assigns the corresponding virtual deck to that channel for audio playback.

When two DJs are connected to the Sixty-Four, they can quickly swap deck control between computers

using the Source Select knobs. Any of the four virtual decks can be swapped back and forth with a simple

knob twist. Nice and easy, just the way we intended.

The DJ Handover Walkthrough

Swapping between two DJs using the Sixty-Four with Serato DJ is quick and seamless. In the scenario

below, one DJ, let’s call him DJ A, is already connected to the Sixty-Four using either USB port A or B.

With DJ A’s computer already connected to the Sixty-Four and playing music, do the following:

1. Connect your computer to the unused USB port on the Sixty-Four.

2. Switch the Input Source on a non-playing input channel to the USB source of your computer.

3. Play a track on this Deck and mix it in when you're ready — audio from both computers are in the mix.

4. Fade out the audio playing from DJ A’s computer to the audio playing from your computer.

5. Assign the Input Source for the remaining free mixer channel(s) to your computer and continue DJing.

When DJ A is done, disconnect his computer from the USB port. If you’re back-to-back mixing with DJ A,

keep the computer connected and perform the same swapping instructions to regain deck control.

Enhancing Back-to-Back Mixing with the USB Insert

To enhance your back-to-back mixing experience, the Sixty-Four is equipped with two USB effect

inserts. The USB Inserts allow you to route audio from the Sixty-Four back to your computer for post-

fader effects. Now, with two USB Inserts, both DJs can quickly route audio back to their computers using

independent inserts for USB A and B. This gives both DJs the exibility to swap insert audio routing as

easily as swapping decks.

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 39 40

Keine Kommentare

Rane MM 12 Bedienungshandbuch Seite 25