Rane ECS v2 Hardware (ECB 6 and ECM 8) Bedienungsanleitung PDF herunterladen (Seite 1)

HW Manual-1

ECS HARDWARE MANUAL ECS v2

ENGINEERED CONFERENCE SYSTEMS

Quick Start

Typically, a complete ECS system is comprised of one

ECB 62 Base and one or more ECM 82 Mixers, with

ECS 62 Stereo Expansion Modules as required, and

usually one or more ECS 1 Echo Canceller Modules.

[Performing Plain Old Telephone Service (POTS) type

teleconferencing requires an additional Digital Hybrid,

found in the Rane ECM 64 AD.] If remote diagnostics and

programming are desired, then add a Rane RPD 1

Programming & Diagnostics unit.

The ECS Operating Manuals for these units are split

into two booklets — one for ECS hardware and one for

RaneWare® software. Neither booklet includes service

information. Should any unit require repair, contact the

Rane factory. Telephone, fax and web info is on the rear

of this manual.

Since ECS is a programmable audio system, it must

first be programmed before it can pass any audio. To

simplify this process, there are four system applications in

the RaneWare Operators Manual. Before you begin, look

at these applications and choose the one that most closely

resembles your system. By loading these files into the

ECB 62, a starting template is created that enhances the

setup procedure. Each of these application files use

Memory 16 for alignment.

Most echo problems are caused by improper micro-

phone placement and gain. To achieve good echo cancel-

ler performance, the micorophones must be properly set

up, as shown on page RW Manual-19 (in the ECS

RaneWare Manual).

ECS Hardware Manual

This manual begins by explaining the options and

internal settings for each unit, since all optional accessories

must be installed and all internal jumpers set before

installation of the units into equipment racks. Next are

detailed descriptions of the front and rear panel features,

followed by detailed block diagrams and discussions, as

well as diagrams showing the signal flow making up the

critical “offsets,” or thresholds used by ECS. Then comes

instructions on Power, Audio & Data Connections, as well

as how to set each unit’s Device Address. Complete

electronic and mechanical specifications are found in the

Data Sheet.

Information on installing and running the control

software is found in the second booklet: ECS RaneWare

Operators Manual.

Contents

CUSTOMIZING ECS .................................................... 2

ECB 62 BASE ................................................................ 3

ECS 62 STEREO EXPANSION MODULE ............. 6

ECM 82 MIXER ............................................................ 7

ECA 1 ECHO CANCELLER MODULE ...................10

POWER, AUDIO, AND DATA CONNECTIONS ..11

SETTING THE DEVICE ADDRESS ........................13

ECB 62 Base & Security Cover

U.S. Patent 5,848,146 on all Rane ECS products

Windows is a registered trademark of Microsoft Corporation

RaneWare is a registered trademark of Rane Corporation

ECM 82 Mixer & Security Cover

WEAR PARTS: This product contains no wear parts.

1 2 3 4 5 6 ... 13 14

Inhaltsverzeichnis

Seite 1 - ECS HARDWARE MANUAL ECS v2

HW Manual-1ECS HARDWARE MANUAL ECS v2ENGINEERED CONFERENCE SYSTEMSQuick StartTypically, a complete ECS system is comprised of oneECB 62 Base and one

Seite 2 - CUSTOMIZING ECS

HW Manual-10Warning: Proper static discharge measures must befollowed when installing or configuring this card.Figure 11. ECA 1 Installation with ECM

Seite 3 - ECB 62 BASE

HW Manual-11POWER, AUDIO, & DATA CONNECTIONSPOWERThe Rane RS 3 Power Supply is provided with eachECB 62 Base, and required for operation of the EC

Seite 4 - HW Manual-4

HW Manual-12AMX AX 232 to ECB 62 - Euroblock to DB-9 malePC to ECB 62 - DB-25 female to DB-9 malePC to ECB 62 - DB-9 female to DB-9 maleUnbalanced sou

Seite 5 - ECB 62 Installation Notes

HW Manual-13SETTING THE DEVICE ADDRESSThe Device Address is set using a binary code which may be determined using the followingtable, our Windows Addr

Seite 6 - HW Manual-6

HW Manual-14103154©Rane Corporation 10802 47th Ave. W., Mukilteo WA 98275-5098 TEL (425)355-6000 FAX (425)347-7757 WEB http://www.rane.comFCC NOT

Seite 7 - ECM 82 MIXER

HW Manual-2CUSTOMIZING ECSBefore installing ECS components, there are a few optionsthat need to be determined first. All but one of these requireremov

Seite 8 - ECM 82 Installation Notes

HW Manual-3ECB 62 BASEFigure 2. ECB 62 Audio Bridge Figure 3. Port 1 Selection and ControlTHE BASEThe ECB 62 Base is the master controller of the ECM

Seite 9 - HW Manual-9

HW Manual-4ECB 62 Base - Front Panel Description INPUT SIG level indicator: Lights when the Input signal on any Port, before trim, is above -25 dBu.

Seite 10 - ECA 1 ECHO CANCELLER MODULE

HW Manual-5ECB 62 Base - Rear Panel Description PORT 1 MIXER INPUTS: MIX 1 thru MIX 6 connect to the MIX OUTs of the ECM 82 Mixers via the 12-pin Eur

Seite 11 - HW Manual-11

HW Manual-6DESCRIPTIONThe ECS 62 is a plug-in module for the ECB 62 Base.Once installed, the Base can accommodate both stereo andmono audio. Included

Seite 12 - HW Manual-12

HW Manual-7PHANTOM POWERThe ECM 82 Mixers are shipped with internal PhantomPower switches in the “on” position. To change, remove thetop cover and loo

Seite 13 - SETTING THE DEVICE ADDRESS

HW Manual-8ECM 82 Mixer - Front Panel Description INPUT SIG indicator: Lights when any Input signal, before trim, is above -25 dBu. Use to check sign

Seite 14 - HW Manual-14

HW Manual-9ECM 82 Mixer - Rear Panel DescriptionAn invalid Device Address set on the Mixer causesits COM LED to continually flash. The ECM 82’spower m

Kommentare zu diesen Handbüchern

Keine Kommentare

Rane ECS v2 Hardware (ECB 6 and ECM 8) Bedienungsanleitung Seite 1

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Audio Rane ECS v2 Hardware (ECB 6 and ECM 8) herunter. Rane ECS v2 Hardware (ECB 6 and ECM 8) User Manual Benutzerhandbuch

Inhaltsverzeichnis

Kommentare zu diesen Handbüchern

Rane ECS v2 Hardware (ECB 6 and ECM 8) Bedienungsanleitung Seite 1

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Audio Rane ECS v2 Hardware (ECB 6 and ECM 8) herunter. Rane ECS v2 Hardware (ECB 6 and ECM 8) User Manual Benutzerhandbuch

Inhaltsverzeichnis

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Audio Rane ECS v2 Hardware (ECB 6 and ECM 8)